LCD Panel |
- 10.4-inch TFT LCD panel with LED backlight
|
|
- Brightness: 1200 cd/m² (typical)
|
- Viewing angle: 140° (H):120°(V)
|
- Contrast ratio: 500:1 (typical)
|
Touch Screen Sensor |
|
- Anti-glare coating surface
|
- Transmission rate: 81 ± 3%
|
CPU & Chipset |
- Intel Atom® x7-3950 processor dual core 1.6GHz memory
|
- One 204-pin DDR3L 1600MHz SO-DIMM slot (default: 4GB)
|
Expandable Storage |
|
|
Expansion |
- 3 x Full-size mini-PCIe socket (PCIe + USB)
|
- 1 x Full-size mini-PCIe socket (USB)
|
|
|
I/O Interface-Front |
|
|
|
|
- 4 x LED indicators (power/battery charging, WLAN, shift, storage)
|
- F1 ~ F10 programmable function
|
|
I/O Interface-Lateral |
-
- Right Side
- – 1 x CFast card slot
- – 1 x System reset button
- – 1 x USB 2.0 host type A connector
|
-
- Left Side
- – 1 x antenna for WWAN
|
I/O Interface-Bottom |
-
- 1 x M12 (22-pin)
- – 1 x 10/100/1000, LAN1 (wake up on LAN)
- – 1 x RS232 (Tx/Rx)/RS422/RS485 (RI, 5V/0.5A, 12V/0.5A)
- – 1 x DR (odometer + speed )
- – 2 x GPI
- Source: 9V ~ 60V-in (default)
- Sink: external 0V ~ 60VDC pull-high selected by software settings
- Input High “1” Voltage: 3.3 ~ 60 VDC
- Input Low “0” Voltage: 0 ~ 2 VDC
- – 2 x GPO
- Source: 9V ~ 60V-in (default)
- 12V/6mA, 24V/12mA, 36V/18mA, 48V/24mA, 60V/30mA
- Sink: external max. 0.5A pull high
|
-
- 1 x M12 (21-pin)
- – 1 x Mic-in
- – 1 x Line-out
- – 1 x full RS232/422/485 (RI, 5V/0.5A, 12V/05A)
- – 2 x Isolated CANBus 2.0B
- When installing CAN06, CAN2 becomes J1939/ISO15675-4
- When installing CAN05, CAN2 becomes J1708
- 1 x iButton
|
-
- 1 x M12 (5-pin)
- – 9V ~ 60V DC in (UPS battery: 12V, 24V, 36V and 48V)
|
-
- 1 x M12 (8-pin)
- – Either of DC output or RFID
- 1 x DC output (12V/2A )
- 1 x RFID (Tx/Rx, 12V/2A)
|
-
- 1 x M12 (8-pin)
- – 1 x 10/100/1000, LAN2 (optional for PoE 802.3af/at)
|
-
- 1 x M12 (8-pin)
- – 2 x USB type A
|
-
- 1 x M12 (18-pin)
- – Expansion port
|
- 1 x GPS antenna SMA connector (on housing)
|
I/O Interface-Top |
|
Mechanical |
|
-
- Enclosure: Aluminum die castig
- Mounting: VESA 75
|
- Ingress protection: Complete IP65
|
- Dimension: 289.98mm(W) x 229.97mm(H) x 68.70mm(D)
|
|
Power Management |
- 9V ~ 60V DC in (UPS: 12V, 24V, 36V and 48V)
|
- Reverse protection/over voltage protection/under voltage protection
|
- Ignition On/O control & programmable On/O delay timing
|
- Wake up by LAN1, SMS, RTC and ignition
|
Environment |
- Operating temperatures: Ambient with air -30°C to 60°C
|
- Storage temperatures: -30°C to 70°C
|
- Relative humidity: 10% to 90% (non-condensing)
|
-
- Vibration
- Operating: MIL-STD-810G, 514.6 Procedure 1, Category 4
- Storage: MIL-STD-810G, 514.6 Procedure 1, Category 24
|
-
- Shock
- Operating: MIL-STD-810G, Method 516.6, Procedure I, trucks and semi-trailers = 40g
|
-
- Crash hazard
- MIL-STD-810G, Method 516.6, Procedure V, ground equipment = 75g
|
Operating System |
|
- Linux: YOCTO (by request)
|
Standards/Certifications |
|