Nuvo-8208GC

The Nuvo-8208GC from Neousys is the world’s first dual-GPU platform developed for Vehicle PCs (Car-PC, Car computer). The graphics card slots are intended for two high-end NVIDIA® boards with 250 W power consumption each.

Category: Tag:

Description

The Nuvo-8208GC from Neousys is the world’s first dual-GPU platform developed for Vehicle PCs (Car-PC, Car computer). The graphics card slots are intended for two high-end NVIDIA® boards with 250 W power consumption each. They enable an enormous GPU performance of up to 28 TFLOPS (FP32 performance test) for applications in Autonomous driving, as well as for other GPU-accelerated applications with extremely high demands on computing power, e.g. Artificial intelligence (AI).

The recently developed power supply concept of the Neousys Nuvo-8208GC accepts input voltages in the range of 8 – 35 V and provides sufficient power for two 250-Watt GPUs. The built-in ignition control for delayed Switch-On/Off enables installation as a vehicle PC via the vehicles electrical board system.

The design of the Nuvo-8208GC follows the patented Neousys thermal design for heat dissipation, the damping clamps, which are also patented, and the innovative GPU mounting mechanism (patent is pending) supports the resistance against vibrations.

The Nuvo-8208GC is Neousys’ answer to the steadily increasing demand for TeraFLOPS GPU platforms. Novel technical progress in energy supply, heat dissipation and mechanical damping facilitates the transfer of Artificial intelligence from research to industrial applications where reliability is important.

Patended damping bracket

Graphics card holder

Technical specifications

System Core
Processor Supporting Intel® Xeon® E and 8th-Gen CPU (LGA1151 socket)
– Intel® Xeon® Processor E-2176G
– Intel® Xeon® Processor E-2124G
– Intel® Core™ i7-8700/ i7-8700T
– Intel® Core™ i5-8500/ i5-8500T
Memory Up to 128 GB ECC/ non-ECC DDR4 2133 SDRAM (four SODIMM slots)
Graphics Independent GPU via x16 PEG port, or integrated Intel® UHD Graphics 630
Chipset Intel® C246 platform controller hub
AMT Supports AMT 12.0
TPM Supports TPM 2.0
I/O Interface
Ethernet 1x Gigabit Ethernet port by Intel® I219-LM
1x Gigabit Ethernet port by Intel® I210-IT
Native Video Port 1x VGA connector, supporting 1920 x 1200 resolution
1x DVI-D connector, supporting 1920 x 1200 resolution
1x DisplayPort connector, supporting 4096 x 2304 resolution
Serial Port 2x software-programmable RS-232/ 422/ 485 ports (COM1/ COM2)
USB 4x USB 3.1 Gen2 (10 Gbps) ports
4x USB 3.1 Gen1 (5 Gbps) ports
1x USB 2.0 ports (internal for dongle use)
Audio 1x Speaker-out
Expansion Bus/ Internal I/O Interface
PCI Express 2x PCIe x16 slot@Gen3, 8-lanes
2x PCIe x8 slots@Gen3, 4-lanes
1x PCIe x4 slot@Gen3, 1-lane
M.2 1x M.2 2242 B key socket supporting dual SIM mode with selected M.2 LTE module
mini-PCIe 2x full-size mini PCI Express socket
Storage Interface
SATA 2x hot-swappable HDD trays for 2.5″ HDD/ SSD installation
M.2 1x M.2 2280 M key socket (PCIe Gen3 x4) for NVMe SSD or Intel® Optane™ memory installation
mSATA 2x full-size mSATA port (mux with mini-PCIe)
Power Supply
DC Input 2x 4-pin pluggable terminal block for 8~35V DC input and 1x 3-pin ignition control
Mechanical
Dimension 225 mm (W) x 360 mm (D) x 186 mm (H)
Weight 8.6 Kg
Mounting Wall-mount with damping brackets
Environmental
Operating Temperature -25°C ~ 60°C with 100% CPU/ GPU loading **/***
Storage Temperature -40°C ~ 85°C
Humidity 10%~90% , non-condensing
Vibration Operating, MIL-STD-810G, Method 514.6, Category 4
Shock Operating, MIL-STD-810G, Method 516.6, Procedure I, Table 516.6-II
EMC CE/ FCC Class A, according to EN 55024 & EN 55032


* The CPU and GPU loading are applied using Passmark® BurnInTest 8.0 with 35 TDP CPU. Operating Temperature degrades with higher TDP CPU. For detail testing criteria, please contact Neousys Technology
** For sub-zero operating temperature, a wide temperature HDD drive or Solid State Disk (SSD) is required.

Downloads

PDF User-Manual_Neousys_Nuvo-8208GC

PDF GPU_Computing_Nuvo-8208GC