Intel® 8th / 9th-Gen Core ™ in-vehicle controller with 8x RJ45 PoE + ports, DIO, CAN bus and RAID
The Nuvo-7108VTC is the reissue of Neousys’ world-famous fanless embedded computer, which is known in 2018. The system is operated by 8th generation Intel Core i processors from Coffee Lake and complies with the specifications of EN50155. It has x-coded M12 connections, two SIM slot designs, 4x USB3.1, 4x USB3.0, COM connections and more.
The system has an integrated CAN bus for connection to an in-vehicle CAN bus system, independent control units or other motor vehicle devices. The isolated digital I / O offers sensor / actuator control, ignition power control and the storage concept with two drive slots (RAID-capable). This makes the Nuvo-7108VTC the most powerful controller that can meet current and future applications in the vehicle.
Powered by an Intel® Coffee Lake Core ™ processor powered by the advanced Intel® Q370 chipset, the Neousys Nuvo-7108VTC offers outstanding performance for emerging high-end requirements than previous generations.
Nuvo-7108VTC has a patented thermal design of passive cooling that allows the hot components to be distributed so that the thermal condition is averaged for each area. The fanless embedded computer from Nuvo-7108VTC can be operated in a wide temperature range from -25 ° C to 70 ° C (100% CPU load).
The Neousys Nuvo-7108VTC offers four 802.3 PoE + ports of an M12-X-coded connector for the power supply of 25 W. The M12 connector can ensure connectivity in shocking / vibrating environments. In addition, the X-coded connector M12 not only offers a higher nominal voltage and surge voltage, but also offers faster data transmission than the A-coded connector
CAN bus is a vehicle bus standard that enables microcontrollers and devices to communicate with the in-vehicle CAN bus system, individual control devices or other vehicle devices in applications without a host computer. The built-in Nuvo7108VTC CAN bus supports the bit rate of up to 1 Mbps for both CAN 2.0A and CAN 2.0B.
||Supporting Intel® 8th/ 9th-Gen CPU (LGA1151 socket, 65W/ 35W TDP)
– Intel® Core™ i7-8700/ i7-8700T/ i7-9700E/ i7-9700TE
– Intel® Core™ i5-8500/ i5-8500T/ i5-9500E/ i5-9500TE
– Intel® Core™ i3-8100/ i3-8100T/ i3-9100E/ i3-9100TE
||Intel® Q370 platform controller hub
||Integrated Intel® HD Graphics 630
||Up to 64 GB DDR4 2666/ 2400 SDRAM (two SODIMM slots)
||Supports AMT 12.0
||Supports TPM 2.0
||2x Gigabit Ethernet ports by Intel® I219 and I210
||4x IEEE 802.3at (25.5W) Gigabit PoE+ ports by Intel® I210
– M12 x-coded connector (Nuvo-7100VTC);
– RJ45 connector (Nuvo-7104VTC)
8x IEEE 802.3at (25.5W) Gigabit PoE+ ports by Intel® I210
– RJ45 connector (Nuvo-7108VTC)
||1x isolated CAN 2.0 port
||4x isolated DI and 4x isolated DO
||4x USB 3.1 Gen2 (10 Gbps) ports
4x USB 3.1 Gen1 (5 Gbps) ports
||1x VGA connector, supporting 1920 x 1200 resolution
1x DVI-D connector, supporting 1920 x 1200 resolution
1x DisplayPort connector, supporting 4096 x 2304 resolution
||2x software-programmable RS-232/422/485 ports (COM1/ COM2)
2x RS-232 ports (COM3/ COM4)
||1x Mic-in and 1x speaker-out
||1x hot-swappable HDD tray for 2.5″ HDD/ SSD installation
1x Internal SATA port for 2.5″ HDD/ SSD installation, supporting RAID 0/ 1
||1x full-size mSATA port (mux with mini-PCIe)
||1x M.2 2280 M key socket (PCIe Gen3 x4) for NVMe SSD or Intel® Optane™ memory installation
||1x full-size mini PCI Express socket with internal SIM socket (mux with mSATA)
2x full-size mini-PCIe sockets (USB signals only) with internal SIM sockets
||2x M.2 2242 B key socket, one with dual front-accessible SIM sockets, supporting dual SIM mode with selected M.2 LTE module
||1x 3-pin pluggable terminal block for 8~35V DC input (IGN/ GND/ V+)
|Remote Ctrl. &
|1x 3-pin pluggable terminal block for remote control and PWR LED output
||240 mm (W) x 225 mm (D) x 84 mm (H)
||Neousys’ patented damping bracket (standard) or optional DIN-rail mounting
||-40°C ~ 70°C **
||-40°C ~ 85°C
||10%~90% , non-condensing
||Operating, MIL-STD-810G, Method 514.6, Category 4
||Operating, MIL-STD-810G, Method 516.6, Procedure I, Table 516.6-II
||EN 50155 (Nuvo-7100VTC),
CE/FCC Class A, according to EN 55022 & EN 55024
* For i7-8700 running at 65W mode, the highest operating temperature shall be limited to 50°C and thermal throttling may occur when sustained full-loading applied. Users can configure CPU power in BIOS to obtain higher operating temperature.
** For sub-zero operating temperature, a wide temperature HDD or Solid State Disk (SSD) is required.